How to make liquid plastic with your own hands – Russia today Posting in CHAT: Russia Plastic parts, especially HDPE, can be dissolved to create an adhesive mass. Let's figure out how to do this and why it is needed. There are many options for its use, but in reality not all are justified: Plastic waste from xylene or PET containers for the production of liquid plastic. To obtain the solution, plastic is suitable, from which household boxes and office equipment are made. It must be crushed, placed in a glass or PET container and filled with xylene. First add a little solvent. If it is completely absorbed, but the crumbs do not dissolve, then it must be refilled. The plastic will dissolve within 24 hours. During this time, you will have to stir it several times to avoid large lumps. The composition must be dissolved and stored in a container with a lid. Bonding plastic. This composition can be used for gluing the same plastics. If, for example, it is made of HDPE, then it is capable of gluing this material very well. If you use raw materials of the same color as the surface being repaired, the gluing area will be almost invisible. This glue holds well. Metal painting. This composition is excellent for painting metal. It protects the surface from corrosion better than paint because it scratches less. The only problem is that such a coating looks heterogeneous. It is perfect for protecting structures for which only anti-corrosion protection is important, and not aesthetics. Casting of parts. Theoretically, such plastic can be used for casting parts. In fact, even after several days it does not dry out. You can use it this way, but you will have to wait for weeks for it to harden until the solvent disappears. Bonding metal and other materials. The adhesion of liquid plastic is high, so it can also be used for gluing metal, tiles and other materials. non-absorbent surfaces. If you let it dry well, the glue will hold tight. It can be used this way. Source link Source link
от
bonabo
8270
от
bonabo
Россия
10189
Как сделать жидкий пластик своими руками
Пластиковые детали, особенно ПНД, можно растворить для создания клейкой массы. Давайте разберемся, как это сделать и зачем это нужно. Вариантов его использования много, но на деле не все оправданы: Пластиковые отходы от ксилола или ПЭТ-тара для изготовления жидкого пластика. Для получения раствора подойдет пластик, из которого изготавливают бытовые коробки и оргтехнику. Его необходимо измельчить, поместить в стеклянную или ПЭТ-контейнер и заполнить ксилолом. Сначала добавляют немного растворителя. Если он полностью впитается, но крошки не растворяются, то его необходимо залить. Пластик растворится в течение суток. За это время вам придется несколько раз его перемешать, чтобы не было крупных комочков. Состав необходимо растворить и хранить в емкости с крышкой. Склеивание пластика. Этот состав можно использовать для склеивания тех же пластиков. Если, например, он изготовлен из ПНД, то он способен очень хорошо склеить этот материал. Если использовать сырье того же цвета, что и ремонтируемая поверхность, то место склеивания будет практически незаметным. Этот клей хорошо держится. Покраска металла. Этот состав отлично подходит для покраски металла. Он защищает поверхность от коррозии лучше, чем краска, поскольку меньше царапает. Проблема лишь в том, что такое покрытие выглядит неоднородно. Он прекрасно подходит для защиты конструкций, для которых важна только антикоррозийная защита, а не эстетика. Отливка деталей. Теоретически такой пластик можно использовать для отливки деталей. Фактически, даже через несколько дней он не высыхает. Использовать его таким способом можно, но придется неделями ждать, пока он затвердеет, пока не исчезнет растворитель. Склеивание металла и других материалов. Адгезия жидкого пластика высокая, поэтому его также можно использовать для склеивания металла, плитки и других материалов. невпитывающие поверхности. Если дать ему хорошо высохнуть, клей держится крепко. Его можно использовать таким образом. Source link
от
bonabo
9987
Kuban camps will accept children from flooded regions of Russia – Russia today Posting in CHAT: Russia April 28, 2024, 05:46 Kuban camps will accept about 4 thousand children from the flooded regions of the country RIA Novosti Read 360 in About four thousand children from the flooded areas of Orenburg, Kurgan and Tyumen will be able to relax in the camps of the Krasnodar Territory. The regional Ministry of Labor and Social Development told RIA Novosti that Kuban is ready to accept about a thousand children in May and three thousand in the summer. The number of children whom the regions can send for rest and entertainment is still being clarified. “The specific figure for the arrival of children from the affected regions will be known after May 2,” the department explained the order of Russian President Vladimir Putin. Earlier it was reported that the Russian leader instructed the government to provide the Orenburg region with financial assistance in the amount of 490 million rubles to help those affected by the spring flood. It is expected that by Monday, April 29, the water level in the Ishim River may rise. reach your peak. Authors: Lyudmila ShorokhovaKurgan regionKrasnodar region Flood in the Orenburg region. Source link Source link