The discharge of melt and rainwater into sewer wells complicates the situation in the city – Russia today Posting in CHAT: Russia 03/28/2024 13:16 SAMARA. MARCH 28. LAST NEWS. Read: 33 Print version If you find an error in the text, highlight it and press CTR+Enter Samara servants are sounding the alarm due to an increase in the flow of rain and melt water into the city sewerage system. According to RKS-Samara, in just one day from March 26 to 27, the sewerage pumping station, which receives sewage from Upravlencheskiy, pumped 16 thousand cubic meters instead of the usual 4. This is mainly due to the fact that the sewage system. systems, wells are opened, and individuals and businesses are forced to release water. Doing this is strictly prohibited. Photo: courtesy of the RKS-Samara company “Domestic sewerage is not designed for such an increase in volume, the reception of melt water. The wastewater overflows and comes to the surface somewhere else, only with the wastewater. On the night of March 26-27, the RKS-Samara dispatch service received 60 requests for sewer overflows! the company said. An even greater threat is posed by debris found in waterways. It disables equipment, which can lead to the most severe consequences. In just a few hours on the morning of March 27, 8 tons of rags arrived at the Municipal Wastewater Treatment Plant. GOKS employees are forced to manually clean off these rags and other debris to keep the structures functioning. “Don't complicate the situation! Follow the rules of action during floods!” RKS-Samara warns that if sewer wells are opened to drain water from the streets, administrative measures will be taken, especially against the management company on whose territory the well is located. Keep it simple, follow the rules!” they call RKS-Samara. It is strictly forbidden to dump ice and snow into sewer wells and pour melt and rain water into them. The functioning of the entire city sewer system, comfort in homes and on the streets of the city now depend on this. Last news Source link Source link
от
bonabo
126114
от
bonabo
9482
Do-it-yourself automatic rainwater irrigation without pumps or electricity. Posting in CHAT: Russia If you have a system for collecting water from your roof when it rains into a container, such as a metal barrel, you can create an automatic watering system without using a pump or consuming electricity. Any adult with at least minimal plumbing skills can handle this type of work. You must first prepare the following materials: a polyethylene pipe with a diameter of 32 mm; Steel pipe with a diameter of 1 inch and a length of 150 mm; two inches of nuts for 1 inch; two silicones. garnishes per 1 inch walnut; two elbows with internal thread 1 inch × 32 mm; two corners 90 degrees 32×90 mm. To work, you only need a 32 mm metal drill, a drill holder with a rod and a drill, as well as a drill. The process of making an auto-irrigator Handle with a crown We clamp the rod into the drill chuck and drill a hole in its wall just below the top of the barrel. Insert the scraper into the drilled hole. We install one silicone gasket on the outer and inner sides of the barrel wall and tighten them tightly with nuts using open-end wrenches. We screw and tighten two plastic corners with internal threads to the ends of the disk, having previously sealed them with smoke tape. We connect the bends with the corners. We attach a piece of plastic pipe to the inner hole, a little short to the bottom of the barrel, and to the outer hole we connect an irrigation polyethylene pipe of the required length. We drill into it at each bush or tree. small holes for irrigation. Our simple irrigation system works by using a small difference in hydrostatic pressure. When it rains, the barrel is filled to the top with rainwater, creating excess pressure due to a column of liquid from the top of the container to the outlet. As a result, the water rises through the internal vertical pipe and enters the irrigation line with holes. Even if the rain stops and the water in the barrel drops below the outlet, watering the plants does not stop because a vacuum is created in the irrigation pipe. a vertical inner pipe and water will be sucked into it until the container is completely empty. It is advisable to equip the end of the suction pipe in the barrel with a removable mesh filter to retain small debris and prevent clogging of the irrigation holes. system. You can also create an irrigation system based on a large cube with bottom wiring, control taps and pipe routing. Source link Source link