How to make a reliable hose clamp from wire – Russia today Posting in CHAT: Russia The hose connected to the pipe or fitting must be tightened with a clamp so that it does not break under pressure. It can be used as a piece of wire that just needs to be stretched properly. It will hold even the best worm or spring clamp. What you will need: Binding wire. Clamp manufacturing process. You need to prepare a piece of wire. In this form, it should be significantly longer than the circumference of the hose. When folded, its edges should intersect, forming a loop. The workpiece is applied to the hose, and its edges are twisted with a handle. 3-4 full turns are enough. Then you should tighten the loop in the same way. This tension on the loop will add a tension force that cannot be achieved the first time with regular twisting. Here you need to focus on the tension force so as not to crush the device under the hose and break the wire. It turns out to be a very powerful clamp that costs a few pennies. Source link Source link