During a picnic or fishing, you have to come up with something on the spot or carry a large grill with you. An alternative to this would be a homemade trellis on legs. It will allow you to fry meat and vegetables over high heat and even place a frying pan and saucepan. The peculiarity of this design is simplicity, compactness and lightness. Even tourists and cyclists can take this grill with them. Materials: old refrigerator grill or 6-8 mm fittings – regular refrigerator grill 4 pcs. It must be cleaned of rust and paint residues. Then 4 bars of 45 cm each, so that the legs are longer, then they can be longer correctly when installed. mesh in the sand, for example on the beach. Nuts are soldered to the edges of the rods so that the weld does not interfere with their threads. The second end of the rods is sharpened. The mesh frame is cut along the sides parallel to the transverse rods. This is necessary to get legs. Then the edges of the cuts are welded. To use the net, you need to bury its legs in the ground to the required depth. After this, a fire is lit under it, and after it burns out, food is placed on it. It is also useful as a stand for a frying pan or pot.
0 комментариев